Search
Search

Cn  |  En

QUALITY HARVEST PRODUCT

A professional manufacturer of special separation membrane in China.It has become the first governing unit of the nanofiltration industry alliance, and has also been appraised as a national high-tech enterprise.

baoyun
All categories

PRODUCT

Special separation membrane

There is currently no content to display
Please add data record on website background.

MAYENCE® anti-pollution HV-8040FR RO membrane

Withstandarddimensions,itcanmatch8-inchmembraneshells. Availabletotreatmentofhighmicrobialcontaminationwater,effectivelyreducethefoulingoforganicmatterandothersources.  Comparedwiththeordinarylow-pres
ProductDec
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
With standard dimensions, it can match 8-inch membrane shells.
Available to treatment of high microbial contamination water, effectively reduce the fouling of organic matter and other sources. 
Compared with the ordinary low-pressure RO membrane,it has lower cleaning frequency and prolong service life.
 
 
Performance parameter:
 
Type
Capacity
Normal rejection %
Area
Spacer
m3/d
GPD
m2
ft2
mil
HV-8040FR
38.6
10200
99.5
37
400
34
 
Test conditions:
 
Operation pressure 225psi(1.55Mpa)
Temperature of test solution 77ºF  (25℃)
Concentration of test solution 1500mg/l (as Nacl)
Recovery rate per membrane 15%
PH of test solution 7
Mini rejection rate of membrane 99.2%
 
Operation conditions:
 
Max operation pressure 600psi (4.14MPa)
Max feed flow 75gpm (17 m3/h)
Max feed water temperature 104℉ (40℃)
Max feed SDI 5
Feed Max chlorine residual concentration 0.1ppm
PH at continuous operation 3-10
PH of CIP 2-12
Max pressure loss per membrane 15psi (0.10MPa)
 
Membrane size drawing:
 
 
Notice:
 
1. The permeate value listed in the table is the average value. The permeate flow of single membrane is tolerance not exceeding ±15% of the nominal value.
 
2. All the membrane elements have been strictly tested before leaving the factory, and have been treated by dry technology, then sealed with plastic bag, and further packed in carton boxes. In long term suspension, to prevent the breeding of microbes, soak the membrane elements with protective solution is highly recommened, the solution (prepared with RO permeate water) containing 1.0% sodium bisulfite (food- grade).
 
3. Discharge all the RO permeate and rejected water produced during the first one hour after system start-up.
 
4. During storage time and operation period, it is strictly prohibited to added any chemical medicament that may be harmful to membrane elements. In case of any violation in adding chemical medicament, we assumes no liability for any damages incurred.
 
5. Along with technical development and product renovation,all information will be updated at any time. Please keep notice our latest information of the product .
扫二维码用手机看
未找到相应参数组,请于后台属性模板中添加

Related Products

Related comment

Comments
0 comments
There is currently no content to display
Please add data record on website background.
Harvest Membrane

You can share our website with your friends.

1 1 1 1 1

CONTACT US

Harvest Membrane

No.280,Guoda Road,Zhaoyuan City (265400),

Shandong Province, China

86-535-8118056

PRODUCTS

Harvest Membrane

MESSAGE

留言应用名称:
首页
描述:

Copyright @  Lu ICP No.15038404 Yantai Harvest Membrane Technology Co. Ltd.  Powered by : www.300.cn