
TECHNICAL
Special separation membrane
Installation and Storage Methods for Household RO Membrane
- Categories:Technical
- Author:
- Origin:
- Time of issue:2017-12-21 08:49
- Views:11
(Summary description)1, Prepare the glycerin, fixed tools, gloves and other protective equipment.2, Rinse and clean the pretreatment cartridges (such as quartz sand filter and carbon filter) , SDI15<5
Installation and Storage Methods for Household RO Membrane
(Summary description)1, Prepare the glycerin, fixed tools, gloves and other protective equipment.2, Rinse and clean the pretreatment cartridges (such as quartz sand filter and carbon filter) , SDI15<5
- Categories:Technical
- Author:
- Origin:
- Time of issue:2017-12-21 08:49
- Views:11
Information
1, Prepare the glycerin, fixed tools, gloves and other protective equipment.
2, Rinse and clean the pretreatment cartridges (such as quartz sand filter and carbon filter) , SDI15<5
3, Make sure there is no sludge, oil and metal debris in the front feed pipes of RO. Flush and clean the front feed pipes, membrane shell and high pressure pipes.
4, Tear off the packing bag and not move the trademarks and blue shell. Smear a small amount of lubricant at the part of the sealing ring. Plug the end with two small seal ring into the membrane shell. Tighten up the membrane shell cap and connect the pipe.
Storage
1) Uninstalled RO membrane (before using)
The modules should be stored in wetting condition. please do not pierce the plastic bags and store it until use.
Storage in ventilated area protected from direct sunlight with an ambient temperature of 10℃ is recommended. The ambient temperature should be lower than 35℃.
By freezing, the performance of RO membraane will be damage. So construction insulation measures should be taken to prevent freezing.
2) Installed RO membrane (after using with water)
Storing the RO membrane in gloom place with a lower than 35℃ temperature and protected from direct sunlight.
Taking freezing prevention measures with a lower than 0℃ temperature
Doing chemicals and flushing regularly should be done after the membrane running sometime.
Scan the QR code to read on your phone
Next:
None
Next:
None
CONTACT US

No.280,Guoda Road,Zhaoyuan City (265400),
Shandong Province, China
MESSAGE
首页
描述:
Copyright @ Lu ICP No.15038404 Yantai Harvest Membrane Technology Co. Ltd. Powered by : www.300.cn